Alinco DX-SR8 Especificaciones

AL-100 Operations Manual Version 1.0 1 LDG AL-100 100 Watt Automatic Tuner for Alinco HF Transceivers LDG Electronics 1445 Par

AL-100 Operations Manual Version 1.0 10 Status LED The Status LED is used to indicate various operating modes, tuning status, and error conditi

AL-100 Operations Manual Version 1.0 11 Application Notes Base Station Operation Install your AL-100 in a convenient spot near your operating

AL-100 Operations Manual Version 1.0 12 A Word About Tuning Etiquette Be sure to use a vacant frequency when tuning. With today’s crowded h

AL-100 Operations Manual Version 1.0 13 product failure, as determined by LDG, to be caused by the customer or by other natural calamity (e.g. li

AL-100 Operations Manual Version 1.0 14 Product Feedback We encourage product feedback! Tell us what you think of your LDG product. In a card,

AL-100 Operations Manual Version 1.0 2 INTRODUCTION 3 Jumpstart, or “Real Hams Don’t Read Manuals” 3 Specifications 4 Getting to know your A

AL-100 Operations Manual Version 1.0 3 INTRODUCTION LDG pioneered the automatic, wide-range switched-L tuner in 1995. From its laboratories in

AL-100 Operations Manual Version 1.0 4 Specifications • 0.1 to 100 watts SSB and CW peak power, 30W on digital modes. • Latching relays for u

AL-100 Operations Manual Version 1.0 5 Getting to know your AL-100 Your AL-100 is a quality, precision instrument that will give you many years

AL-100 Operations Manual Version 1.0 6 Rear Panel The rear panel of the AL-100 features four connectors: • Ant connector: Connect the 50-ohm

AL-100 Operations Manual Version 1.0 7 INSTALLATION The AL-100 tuner is designed for indoor use only; it is not water resistant. If you use it

AL-100 Operations Manual Version 1.0 8 OPERATION Power-Up Turn on the transceiver. The LED on the front panel of the AL-100 will blink once. I

AL-100 Operations Manual Version 1.0 9 a memory tuning cycle if data from a previous tune on the present frequency is available. Otherwise, it wi