Alinco EJ-41U Manual de instrucciones descargar pdf (Pagina 18)

l Pall / final-bite

[P] pall bite ON

[F] final-bite ON

l Command/Response

[C] command

[R] Response

l Sequences

[Rn] Receiving sequences. n=0-7

[Sn] Transmitting sequence n=0-7

4-7-3 MCON command

Abbrev. MC default OFF parameters: ON/OFF

Example: MC ON

This allows you to monitor frequency activity even when connected to another station.

ON allows you to monitor while you are connected. OFF does not.

4-7-4 MALL commands

Abbrev. MA default: ON parameter: ON/OFF

Example: MA ON

When ON, all stations will be monitored, connected and unconnected. When OFF, it does not

monitor stations that have sent unproto data such as a CQ call.

4-7-5 MRPT command

Abbrev. MR default: ON parameter: ON/OFF

Example: MR ON

This is to determine if you wish to display relay station (digipeater) information in the header or

not.

If ON is selected, the relay list will be shown with [*]. OFF excludes such information.

4-7-6 TRACE command

Abbrev. TRAC default: OFF parameter: ON/OFF

Example: TRACE ON

When ON, it will display all the details of the frame. The left side block shows frames in 16-digit

codes. The right side block shows them in ASCII codes. The display system may differ from that

of a conventional TNC when the EJ-41U is used.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 28 29

Sin comentarios

Alinco EJ-41U Manual de instrucciones Pagina 18