Alinco EJ-41U Manual de instrucciones descargar pdf (Pagina 45)

Appendix

Command form

Default Parameters Description

Name Short

FIRMRNR FIR OFF ON/OFF The other station sends a notice (packet) to you if it is not

ready to receive data. When ON, receiving such a notice

causes the TNC to suspend transmission until it receives a

“ready” notice.

FLOW F ON ON/OFF

When ON, starting key entry causes the computer to stop

displaying received packets.

FRACK FR 3 0 - 250 Specifies the interval from one transmission until retry

of transmission. The unit of the parameter is 1 second.

GBAUD GB 4800 4800/9600 Selects 4800 or 9600 bps as the transfer rate between

the TNC and the GPS receiver.

GPSSEND GPSS - 0 - 159 Specifies the content of the data to be output to the GPS

characters receiver; this data is used to pro gram the default settings on

the receiver. The output data is not stored in memory.

GPSTEXT GPST $PNTS 0 - 6 Specifies the type of a message to be determined by

characters LTEXT.

HBAUD HB 1200 1200/9600 Selects 1200 or 9600 bps as the transfer rate between

packet stations.

LOCATION

LOC EVERY 0 EVERY/ If set to EVERY, sends GPS data at intervals of the speci-

AFTER n fied period (n). If set to AFTER, sends GPS data only once

( n = 0 - 250 ) after the specified period (n). The unit of n is 10 seconds.

LPATH LPA GPS Call1 ( VIA Specifies calls signs to send GPS data. Call 1 is the call sign

call2, call3, ... of the destination. Call2 to call9 are call signs of stations to

call9 ) be digipeated through.

LTEXT LT - 0 - 159 Specifies the content of a message to be included in GPS

characters data.

LTMON LTM 0 0 - 250 Specifies the interval for displaying a message determined

by LTEXT on the screen; a message appears like a received

beacon packet. The unit of the parameter is 1 second.

MCOM MCOM OFF ON/OFF When ON, causes the TNC to also monitor control packets.

When OFF, causes it to monitor only information packets.

MCON MC OFF ON/OFF When ON, causes the TNC to monitor other stations

while in connection with the target station.

MONITOR M ON ON/OFF When ON, causes the TNC to monitor packets.

MRPT MR ON ON/OFF When ON, causes the TNC to display the entire digipeat

list for monitored packets.

MYCALL MY NOCALL 6 characters Specifies your call sign.

+SSID

PACLEN P 128 0 - 255 Specifies the maximum length of the data portion of a

packet.

PACTIME PACT AFTER 10 EVERY/ If set to EVERY, sends a packet at intervals of the specified

AFTER n period (n). If set to AFTER, sends a packet only once after

( n = 0 - 250 ) the specified period of (n). The unit of n is 100 milliseconds.

PERSIST PE 128 128 Specifies a parameter to calculate probability for the

PERSIST/SLOTTIME method.

PPERSIST PP ON ON Causes the TNC to use the PERSIST/SLOTTIME method

when ON, or the DWAIT method when OFF.

1 2 ... 40 41 42 43 44 45 46 47

Comentarios a estos manuales

Sin comentarios

Alinco EJ-41U Manual de instrucciones Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Alinco EJ-41U