Alinco EJ-41U Manual de instrucciones descargar pdf (Pagina 46)

Command form

Default Parameters Description

Name Short

RESET RESET - - Restores the default status for all the commands.

RESPTIME RES 5 5 Specifies the acknowledgement packet transmission delay.

The unit of the parameter is 100 milliseconds.

RESTART

- - Causes the TNC function as if it is switched OFF then ON.

RETRY RE 10 10 Specifies the number of transmission retries. If packets are

not correctly accepted while connected, a connect request

is sent again after the specified number of retries.

SENDPAC SE $0D $0D Specifies a character that forces a packet to be sent.

SLOTTIME SL 3 3 Specifies the period of random number generation intervals

for the PERSIST/SLOTTIME method. The unit of the pa-

rameter is 10 milliseconds.

TRACE TRAC OFF OFF When ON, causes the TNC to display all received packets

in their entirety.

TRIES TRI 0 0 Specifies the number of transmission retries programmed

in the retry counter.

TXDELAY TX 50 50

Specifies the time delay between PTT ON and start of

transmission. The unit of the parameter is 10 milliseconds.

UNPROTO U CQ CQ Specifies call signs to send a packet in Unprotocol mode.

Call 1 is the call sign of the destination. Call2 to call9 are

call signs of stations to be digipeated through.

XFLOW X ON ON Causes the TNC to perform software flow control when

ON, or hardware flow control when OFF.

Appendix

1 2 ... 41 42 43 44 45 46 47

Sin comentarios

Alinco EJ-41U Manual de instrucciones Pagina 46